LUFTooL Trap (condensation piece)
LUFTooL Trap
When the blown air has to pass through an unheated zone, it is necessary to ensure that only a minimum of condensate forms in the pipe
and then it didn't mold and water didn't flow into the recuperation unit. Condensation pieces will help with this. The combination with pipes made of EPE or EPS insulators is ideal due to minimal thermal bridges.
The plastic condensation piece, or condensate outlet, is inserted into the air-technical thermal insulation pipe (EPE or EPS). We offer it for air ducts with an internal diameter in sizes from 125 to 200 mm. The condensation piece removes excess moisture from the pipe.
Thanks to the insertion of a condensing piece into the insulating pipe, the thermal bridges of this part of the system are eliminated. The Condensate Drain Hose d16 is fully compatible with the condensation piece , which just slides onto the spigot.
The condensation piece is suitable for the exhaust pipe (EHA) - from the recuperation unit to the exterior. Air with almost 100% humidity flows in this pipe when moisture condenses in the recuperator. It is placed above the recuperation unit in a vertical pipe.